Build a robot is not difficult as you think… With no experience in electronics, you can make a robot easily in 2 hours 
Ho it can be..?
Build a Robot in 2 Hours
November 6th, 2008 by Robot Technology | 6 Comments | Filed in Electronics, Mechanics, Microcontroller, Programming, Robotics Tutorial, Sensors, SoftwareMaking Electronics Schematics is Easy with Diptrace
September 12th, 2008 by Robot Technology | No Comments | Filed in Electronics
Making schematics and pcb layout will be easier with this program.
Autorouting is included in this program. So you can create PCB layout automatically.
Click this link to find more about Diptrace
Tags: diptrace, Electronics, pcb layour, schematics
DC Motors for your robots
September 11th, 2008 by Robot Technology | No Comments | Filed in Mechanics
Choosing DC motors is not simple as it says. You need to calculate the velocity, voltage, current and the most important is… torque… I’ve some experience about choosing the DC motor for my robots. Sometime my robot going wild with high velocity motor and low torque motor. Sometime my robot is to slow but the acceleration is very good, so easy to be controlled.
Tags: actuator, dc motor robot, dc motors, robot actuator, robot motor
H-Bridge for your robot
September 11th, 2008 by Robot Technology | 6 Comments | Filed in Electronics, Robotics Tutorial
H-Bridge is a must used for your robot to control the motors… the speed and the direction of each motor. There are many kinds of H-Bridge. For low current DC motor, you can use IC L293D or L298N to drive your motor.
H bridge is an electronic circuit that enables a voltage to be applied across a load in either direction. These circuits are often used in robotics and other applications to allow DC motors to run forwards and backwards. H bridges are available as integrated circuits, or can be built from discrete components.
Tags: h bridge, h bridge circuit, h bridge schematic, h-bridge diagram, h-bridge motor, h-bridge robot, schematics
Line Follower Robot without Microcontroller (with timer)
August 11th, 2008 by Robot Technology | 7 Comments | Filed in Electronics, Robotics Tutorial, Sensors
Another Line Follower Robot without microcontroller project. This project built using IC timer 555 to generated PWM signal to make the motor running smoothly. This Line Follower Robot tutorial written by Jaseung Ku – 17 Dec 2005. May be this is “not professional” robot, but i think it so cool to create a robot simple things around your place.
Tags: line follower, line follower robot circuit without microcontroller, line follower robot without microcontroller, line follower without microcontroller, Line following robot without microcontroller, mini line follower robot, mini line follower without microcontroller, robot, robotics, tutorial
A D V E R T I S E M E N T